Dental Simulation Unit MQ-DS02
Order Number: MQ-DS02
Product Introduction
- A phantom head with a torso, mounted on an workbench. Which can be adjusted in height, angle, and recline to simulate different patient positions during dental treatment.
- They are equipped with various dental instruments and accessories, such as high-speed and low-speed handpieces, 3-way syringe, LED lamp, intraoral camera(optional) ect.
- Different types of treatment led lamp can be selected to provide sufficient illumination for dental procedures, just like in a real – life clinical setting.
- There are numerous jaw simulators and tooth models to choose from, which can represent different dental conditions and anatomical structures, allowing trainees to practice a variety of dental treatments.
Specification
| Application | University, Colleague, Clinic, Training Center |
| Workbench Material | Iron & Plywood |
| Size Of Workbench |
1200*600*800MM/L 47.24″ x W 23.62″ x H 31.50″
|
| Operation | Electrical |
| Power | 120W |
| Leakage Current | ≤0.5mA |
| Insulation Resistance | >2MΩ |
| Air Supply | 0.55Mpa |
| Height Of Torso | 65cm~75cm |
| Angle Of Torso | Max 75° |
| Standard Component | Dental Phantom Head*1; Dental Typodont*1; High-speed & Low-speed Handpieces*1; 3-way Syringe*2; LED Lamp*1; Dentist stool*1; Foot Control*1; Weak suction*1; Clean Water Bottle 600ml *1; Waste Water Bottle 600ml*1. Intraoral Camera/Air Compressor(Optional) |
