MQ-DS01 Dual-User Dental Simulation System
Order Number: MQ-DS01
Product Introduction
- This dual-station dental simulation unit is designed for universities, dental colleges, clinics, and training centers, providing realistic preclinical practice for two students. A durable cold-rolled steel workbench supports two dental phantom head stations, a central work surface, and independent instrument systems.
- Each station includes a dental typodont, high-speed and low-speed handpieces, a 3-way syringe, LED operating lamp, foot control, suction, a 600 ml clean water bottle, a 600 ml waste water bottle and a dentist stool. The manual dental simulator uses a 0.55 MPa air supply and 72 W power, with leakage current of no more than 0.5 mA and insulation resistance of at least 2 MΩ. The torso tilts up to 75°, creating a practical dental patient simulator for operative, restorative, endodontic, and four-handed training.
- Notice: Must use with air compressor.
Specification
| Application | University, colleague, clinic, training center |
| Workbench | Cold rolled steel |
| Dimensions(MM) |
L 1200*W 700*H 800/L 47.24″ x W 27.56″ x H 31.50″
|
| Operation | Manual |
| Power | 72W |
| Leakage Current | ≤0.5mA |
| Insulation Resistance | >2MΩ |
| Air Supply | 0.55Mpa |
| Height Of Torso | Height is not adjusted, the height of torso to the ground is 62cm |
| Angle Of Torso | Max 75° |
| Standard Component | Dental phantom head; Dental typodont; High-speed & Low-speed handpieces kit; 3-way syringe; LED lamp;Dentist stool; Foot control; Weak suction; Dentist stool; Clean water bottle 600ml; Waste water bottle 600ml. Must use with air compressor(optional) |
