Dental Simulation Unit MQ-DS01
Order Number: MQ-DS01
Product Introduction
- A phantom head with a torso, mounted on an workbench. Which can be adjusted in height, angle, and recline to simulate different patient positions during dental treatment.
- They are equipped with various dental instruments and accessories, such as high-speed and low-speed handpieces, 3-way syringe, LED lamp, intraoral camera(optional) ect.
- Different types of treatment led lamp can be selected to provide sufficient illumination for dental procedures, just like in a real – life clinical setting.
- There are numerous jaw simulators and tooth models to choose from, which can represent different dental conditions and anatomical structures, allowing trainees to practice a variety of dental treatments.
Specification
| Application | University, Colleague, Clinic, Training Center |
| Workbench Material | Iron & Plywood |
| Size Of Workbench |
1200*700*800MM/L 47.24″ x W 27.56″ x H 31.50″
|
| Operation | Manual |
| Power | 72W |
| Leakage Current | ≤0.5mA |
| Insulation Resistance | >2MΩ |
| Air Supply | 0.55Mpa |
| Height Of Torso | Height is not adjusted, the height of torso to the ground is 62cm |
| Angle Of Torso | Max 75° |
| Standard Component | Dental Phantom Head*2; Dental Typodont*2; High-speed & Low-speed Handpieces*2; 3-way Syringe*4; LED Lamp*2; Dentist stool*2; Foot Control*2; Weak suction*2; Clean Water Bottle 600ml *2; Waste Water Bottle 600ml*2. Intraoral Camera/Air Compressor(Optional) |
